Full-Automatic Motorized Showcase

model no: MSO-128

01 نظرة عامة

TIntroducing our latest 2.0 wall display case – featuring a fully automatic motorized door system and seamlessly combining four integrated subsystems: electric door access, intelligent lighting, precision climate control (constant temperature & humidity), and a comprehensive security alarm. This flagship bespoke solution embodies the perfect synergy between smart display innovation and the highest standards of artifact preservation.

02 ميزات المنتج

  • Fully Automatic Door Operation
  • Equipped with a motorized automatic door opening and closing system, the cabinet doors are controlled via remote, eliminating the need for manual pushing or pulling. This significantly reduces operational difficulty during exhibition setup, artifact inspection, and routine maintenance.
  • Dustproof and Airtight Sealing
  • Sealing strips are applied between the glass panels and the frame, creating a relatively enclosed internal space
    that effectively prevents the ingress of dust, moisture, and insects, thereby maintaining a clean and stable
    display environment.
  • Micro-Environment Control
  • Integrated with constant temperature and humidity modules as well as air purification systems, the case stabilizes internal temperature and humidity parameters, slows down oxidation, moisture absorption, and dust accumulation on valuable artifacts, and fully meets the environmental protection standards required for long-term display of museum collections.
  • Security and Theft Prevention
  • The entire case is equipped with door contact alarms, infrared motion sensors, and tilt/gravity detection systems, providing comprehensive, multi‑layer security coverage.
  • Dual Independent Display Compartments
  • The case features two separate display spaces, allowing for partitioned exhibition of different thematic artifacts, or the removal of the partition to create a large continuous compartment for elongated items. Designed with a wall‑mounted layout, only the front face is used for viewing, which maximizes the use of idle wall space in the exhibition hall.
Full-Automatic Motorized Showcase

03 مواد ومواصفات المنتج 03

  • مادة الإطار الرئيسي
    Constructed from high‑strength, high‑quality 6003 cold‑rolled steel profiles, with the 1.5mm cold‑rolled steel sheet surface finished with electrostatic powder coating for enhanced durability and corrosion resistance.
  • زجاج العرض
    مجهزة بزجاج منخفض الانعكاس من فئة المتاحف، مما يقلل من الانعكاسية إلى أقل من 1% ويوفر حجبًا للأشعة فوق البنفسجية ≥99%.
  • Anti‑theft System
    Professional‑grade security alarm system designed for artifact protection, incorporating door contact sensors, infrared motion detectors, and tilt/gravity sensors to ensure comprehensive safeguarding.
  • نظام الختم
    Utilizes museum-grade silicone sealing gaskets or composite sealing strips to ensure an airtight and dustproof environment.
  • Micro‑environment System
    Integrated constant temperature and humidity control system with a temperature range of 15–35°C and humidity range of 10–75% RH (accuracy ±3% RH), adaptable to the preservation needs of a wide variety of artifacts, including paintings, textiles, metalware, and more.
  • Hardware Fittings
    All hardware components are made of high‑quality stainless steel or specially treated with anti‑corrosion coatings for long‑term reliability.
  • Lighting
    Specialized museum‑grade LED light strips or modules featuring low heat emission, adjustable brightness, and flicker‑free operation for optimal artifact illumination.a motorized automatic door opening and closing system, the cabinet doors are controlled via remote, eliminating the need for manual pushing or pulling. This significantly reduces operational difficulty during exhibition setup, artifact inspection, and routine maintenance.

Full-Automatic Motorized Showcase

04 مشهد عرض القطع الأثرية 04 مشهد عرض القطع الأثرية

05 Operation Demonstration

Prior to delivery, each unit undergoes a full‑process standardized system test to ensure stable operation after installation. The workshop procedures include cabinet structure assembly, electric door system commissioning, airtightness sealing verification, lighting system calibration, multi‑level testing of the micro‑environment control system, and leveling adjustment of the shockproof support feet, among other quality assurance steps.

05 Operation Demonstration

Prior to delivery, each unit undergoes a full‑process standardized system test to ensure stable operation after installation.

06 As Seen In

Zongyang Historical Museum1

Zongyang Museum

In the Paintings, Calligraphy, and Rubbings Exhibition Hall of Zongyang Museum, a batch of custom‑made, floor‑standing, fully automatic wall‑mounted display cases have been installed for the permanent display of scroll rubbings and paper‑based calligraphic artifacts. This project represents a typical real‑world application of this showcase model in a regional cultural institution.
Each case is equipped with a fully automatic motorized door opening mechanism, seamlessly integrated with the museum’s security management system. Authorized staff can remotely control the smooth opening and closing of the doors, significantly streamlining the high‑frequency operations of quarterly artifact rotation and routine maintenance inspections. This eliminates the need for multiple personnel to manually push and pull heavy glass doors, greatly reducing labor costs associated with exhibition setup and upkeep. The entire case features full‑perimeter sealing, complemented by a built‑in constant temperature and humidity system that precisely regulates the internal micro‑environment. This creates a stable and secure display space for moisture‑sensitive and easily damaged paper‑based scrolls and rubbings, ensuring their long‑term preservation.

الأسئلة الشائعة

1. كيف نعمل معك؟ (عملية الطلب)

إرسال استفسار ← مناقشة المتطلبات ← تقديم عرض أسعار ← تقديم عرض أسعار ← دفع العربون ← دفع العربون ← التصميم النظري ← أعمال الرسم ← الإنتاج ← فحص الجودة ← التغليف ← دفع الرصيد ← الشحن.

2. هل يمكنك تقديم عرض أسعار بناءً على رسوماتنا؟

نعم، يمكننا تقديم خدمات التصنيع المخصصة وعروض الأسعار وفقًا لمتطلباتك.

3. هل أنت مصنع، وأين يقع مصنعك؟

نعم، نحن كيان مصنع متخصص في تصنيع دعائم عرض المتاحف لسنوات. ويقع مصنعنا في مدينة قوانغتشو بمقاطعة قوانغدونغ - نرحب بزيارتنا للتفتيش!

4. هل يمكننا عمل عينة لفحص الجودة قبل تقديم الطلب؟

طلبات العينات مقبولة، على أن تتحمل أنت رسوم العينة وتكاليف الشحن

5. ما هي مدة مهلة الإنتاج بعد تقديم الطلب؟

بعد تأكيد الطلب، عادةً ما يكتمل الإنتاج في غضون 35 يوم عمل، ويخضع الجدول الزمني الدقيق لكمية الطلب.

6. ما هي شروط الدفع الأكثر أماناً ونسبة الإيداع؟

نحن ندعم طرق الدفع الآمنة: T/T (التحويل البرقي) وضمان التجارة الدولية لمحطة علي بابا الدولية. مطلوب إيداع مبلغ 50%، ويجب دفع الرصيد قبل الشحن.

7. هل يمكننا ترتيب فحص الجودة قبل الشحن؟

بالتأكيد! نرحب بموظفي مراقبة الجودة أو وكالات الطرف الثالث للتفتيش في الموقع. لدينا نظام فحص الجودة الخاص بنا قبل التعبئة والتغليف لضمان جودة المنتج؛ إذا لم تكن متاحًا لإجراء فحوصات في الموقع، يمكننا تقديم تقارير الفحص حسب الحاجة.

جودة عالية

توفر خزائن العرض المتحفي عالية الجودة المخصصة لدينا، والتي تركز على حماية الآثار والعرض الاحترافي وتكييف المجموعات/المساحات مع متطلبات العرض، حاملات آمنة وطويلة الأمد للتراث الثقافي لنقل القيمة التاريخية بوضوح.

توصيل سريع

خزائن عرض المتاحف المخصصة لدينا، المحسّنة بوحدات أساسية مسبقة الصنع، والتصميم السريع والإنتاج/التركيب المبسّط، يتم تسليمها في شهر واحد، مع الحفاظ على معايير حماية الآثار ومعايير العرض المتحفية للاحتياجات العاجلة.

خدمة ما بعد البيع

تقوم خدمة ما بعد البيع لخزانة العرض المتحفي لدينا ببناء نظام يغطي الضمانات الروتينية ويوفر خدمة ما بعد البيع من قبل فرق عمل محترفة في غضون 7-24 ساعة بعد التسليم.